Tri-Metric 2025-A

The top level display allows you to select:
Battery #1 "Volts", Real Time "Amps", "% Full", Battery #2 "Volts".

The secondary display shows you:
Amp-Hours, number of days since Battery #1 was fully charged, number of days since Battery #1 was equalized (if used), Amps or Watts entering/leaving the battery.

Level 2 gives you access to Historical Data including:
1) Cumulative lifetime battery discharging amp-hours.
2) Hours since end of last 5 charge/discharge cycles.
3) Length (in hours) of each of the last 5 charge/discharge cycles.
4) Average current (amps) for the last 5 charge/discharge cycles.
5) Lowest % Full value of each of the last 5 charge/discharge cycles.
6) Lowest battery voltage for the last 5 charge/discharge cycles.
7) Highest battery voltage for the last 5 charge/discharge cycles.

You will need our Tri-Metric Wire Harness w/Shunt kit in order to properly install this battery monitor. You will also need a piece of wire that is no smaller than the largest wire in your system to go from one end of the shunt to your battery negative post.